Posted on Leave a comment

Can you do this to any other metal?



Superelasticity is the ability of Nickel-Titanium alloys of recovering large deformations up to 8% after unloading. For example, here we have a 3D object forming the superelasticity word. When presure applies on one side, while keeping the bottom as a fixed support, the object gets a large and temporary deformation. No problem at all as the material is working inside the elastic zone. Once pressure ends, these 3D letters get back to their initial shape, finishing the superelastic cycle.

Unlike shape memory letters, which maintain deformation after unloading (waiting for some heat to release the memory effect), these recover the shape after load finishes, without the need for a heat source. Due to the higher percentage of Nickel in this superelastic alloy than in those shape memory letters, the transformation temperature value of the superelastic alloy is lower and therefore, at room temperature, usually this value is always reached and the alloy is in austenite state. Deformations occur at the austenite stage, causing what is called “induced martensite”.

Finally, we’d like to invite you to take a look at our Shop. We are selling this example as well as many other solved SMA files for Ansys Workbench 18.1 or higher. Also, if you have a particular project, don’t hesitate to Contact us. We’ll try to do our best to help you.

And donĀ“t forget to visit our YouTube channel!

Superelastic letters

Happy simulations!

SMA Simulation Shop

Posted on Leave a comment

Shape Memory NiTi spring

Shape Memory NiTi spring

Shape Memory NiTi spring

Let’s take a look at this Shape Memory NiTi spring in action. First, let’s examine the Stress-Strain-Temperature graph. Initially the crystal structure is in a zig-zag arragement (twinned martensite). The material forms twins along symmetry lines. When the alloy deforms in cold state, a temporary deformation is set and the zig-zag setup is stretched to a diagonal arragement. This is the detwinned martensite. The twins transform into a new tilted structure.

As a result, the crsytal structure is ready for the shape memory effect. Applying heat, makes the detwinned martensite transforms again into a regular, straight and cubic form and therefore, the remembered shape is set back again. This is the austenite, which is the strongest arragement of the alloy. During this state, the material is stronger, has a higher elacticity modulus and deformations are recoverable up to 8%.

Finally, when the material gets cold again, it returns to the initial twinned martensite, finishing and completing the cycle.

We can check this on the next video. On screen, there are two glasses of water. Hot on the left and cold on the right. This spring is a Nickel, Titanium and Copper alloy. The percentage of Copper in the alloy is 5% and the rest is Nickel and Titanium. Wire diameter is 1mm and outer diameter is 10mm. It deforms in cold state and when inserted in hot water, it recovers its original shape. Cold water helps to speed up the cooling process of the Ni-Ti alloy.

Shape Memory Effect NiTiCu Spring

Check out our new shop where you can find solved Ansys files for your SMA simulations. We also provide special services and support. Please feel free to contact us for helping you on your personal project. You can also visit our YouTube Channel for more videos on Shape Memory Alloys.

Posted on Leave a comment

What are Shape Memory Alloys?

Shape Memory Alloys

Shape Memory Alloys

Shape Memory Alloys, Nickel-Titanium alloys, NiTi or simply Nitinol, are a very special kind of metals able to recover its original shape after very large deformations, usually larger than conventional materials.

What is NiTi? Stress-Strain

Initially, the alloy’s crystal structure arranges in zig-zag position, forming twins along symmetry lines. This is the twinned martensite. When the alloys stresses, this mesh deforms to a detwinned martensite. This phase is stable and the material is ready for the shape memory effect. Once heat is applied, the alloy gets in a higher energy level state or austenite. The mesh changes again to a stronger ortogonal arragement. As soon as the material gets cold again, the crystal structure shifts to the initial zig-zag shape, finishing the cycle.

NiTi Shape memory effect

On this video, you can see a SMA spring in action. The Nickel-Titanium element is holding the weight of a tool. When is cold, the springs stretches and the tool goes down due to the force of gravity. When is hot, the SMA is stronger than the weight of the tool, therefore it goes up. This is just a simple example of how Shape Memory Alloys can be used. The rest of potential applications are up to your imagination. In your particular project, you can design your own mechanism.

The heat source can be electricity (Joule effect), hot water or liquid, gas, etc. To return the mechanism to the initial position, you can use gravity, another spring, material stiffness, etc. You can also use the heat of the sun or the difference between day and night as a way to activate/deactivate your alloy/actuator.

The actuation is fast, reliable and silent. This is especially important in applications where you want to save weight or cannot make any sound.

You can watch more videos on our YouTube channel ,visit our shop or contact us.

Posted on Leave a comment

SMA Simulation Shop opening

SMA Bending Sheet logo

SMA Simulation Shop Opening

Welcome to SMA Simulation Shop. Today is the opening of our shop. We sell solved Finite Elements simulation files of Shape Memory Alloys, under Ansys Workbench 18.1 or above environment.

Here you will find solved files to check material and setup settings. SMA alloys have two main properties: shape memory effect and superelasticity. Ansys Workbench software simulates the complex thermo-mechanical behavior of this amazing metal.

After you buy a file and make the payment, you will get a download link. Files are compressed and you need to use the “restore archive” option inside Ansys Workbench. Files are for version 18.1 or higher. These files won’t work on lower versions and therefore we recommend you check out your software version first.

You will need to provide a 3D model in any known file format. If you cannot provide this, we can make this model.

Finally, we really hope you like our shop. Probably, we are the only ones that sells solved Shape Memory Alloys files on the internet. In addition, we offer simulation services. As a result, we are here to help you on your SMA project.

You can also visit our YouTube channel to find more videos on Shape Memory Alloys

Happy simulations!

The smasimulationshop team.